By Pete | My Husband’s Nook
That is considered one of our favourite RV suggestions and hacks for do it your self campers! Don’t know the best way to preserve RV awnings from flapping? Use my DIY RV awning tie down hack!
The finest tenting gear is just not essentially manufactured in a manufacturing unit, it will possibly come out of your individual toolbox!
Psst we’re compensated…see our disclosures.
The Drawback: Noisy RV Awning Flapping In Wind
We hate the noise made by a retractable RV awning when it’s flapping within the wind! Once we purchased our newest RV, we have been on our first journey once we realized our previous RV awning tiedown strap was not lengthy sufficient for our new energy awning!
So, it’s a good factor we follow what we preach … considered one of our RV tenting suggestions for newbies is to deliver instruments and spare elements! I had to determine the best way to tie down an awning with the provides I had in my software field! Seems … this DIY hack works higher than our previous conventional awning strap package! I created this VIDEO to point out you the best way to tie down your RV patio awning with my DIY hack!
8 Steps: How To Tie Down Your RV Awning
Use these identical steps whether or not you’ve gotten a handbook awning or electrical one.
Step 1:
Hammer the Stake into the bottom straight below the surface nook of your RV awning arms … identical to I did in my video.
Step 2:
Tighten the stress of the awning rafter arm.
Step 4:
Minimize the 1/8-Inch Nylon Rope to the suitable dimension (our awning required about 10 toes).
Then tie one finish of the rope to the carabiner clip.
Now take the opposite finish of the rope and run it by means of the 2 holes within the LARGE camring after which tie a knot on the finish.
1/8 Inch 100% Nylon Rope Stable Braid – Industrial Grade – Excessive UV and Abrasion Resistance
NOTE: When you tie the knot ultimately of the rope earlier than you string it by means of the LARGE camring, you received’t get it by means of the camring holes.
Comply with the sequence as I describe it right here to keep away from frustration. *fistbump*
Step 6:
Run the knotted finish of the rope by means of the stake.
NOTE: The knot (you probably did this in step 4) finally holds the rope in place within the camring notch … identical to you see within the step 7 image.
Step 8:
With a slight quantity of strain, pull down on the carabiner clip to tighten bungee whereas adjusting the LARGE camring (up or down) to take away slack from the twine.
Repeat steps on the opposite finish of the awning.
BAM … You’re Carried out!
Now that your RV awning tie down mission is full, you’ve gotten it protected from the wind if you are tenting within the rain or sunshine! You received’t must take heed to that annoying noise that may drive a sane man loopy!
That’s the best way to preserve your RV awning from flapping within the wind AND keep away from marriage counseling on the identical time! Ha! Now relax and camp! P.S. This hack works on tent cover awnings too!
By no means Depart Unattended
It doesn’t matter what kind of system you employ, all of them have restrictions and may solely deal with masses as much as a sure variety of lbs. That’s why you need to all the time take away your tie down and retract your awning so it’s securely locked in place if you end up away out of your rig.
Electrical Awnings & Wind Sensors
When you’re RVing in a flowery rig, you will have wind sensors inbuilt to your electrical awnings. When the wind exceeds the restrict, the awning mechanically retracts … you don’t even must push a button! If in case you have this setup, you don’t need something tying down the awning until it mechanically releases to permit the awning to mechanically retract at any given time.
VIDEO: Watch How You Do It
Print These Directions
How To Maintain RV Awning From Flapping With DIY RV Awning Tie Down Hack
Tenting For Foodies RV and Tent Tenting Suggestions: How To Maintain RV Awning From Flapping With DIY RV Awning Tie Down Hack
Yield: 1 Pair Of RV Awning Tie Downs
Price: $30
-
Hammer the Stake into the bottom straight below the surface nook of your RV awning arms … identical to I did in my video.
- Tighten the stress of the awning rafter arm.
-
Hold the Bungee over the nook of the awning construction (see picture above).
-
Minimize the 1/8-Inch Nylon Rope to the suitable dimension (our awning required about 10 toes). Then tie one finish of the rope to the carabiner clip. Now take the opposite finish of the rope and run it by means of the 2 holes within the LARGE camring after which tie a knot on the finish. NOTE: When you tie the knot ultimately of the rope earlier than you string it by means of the LARGE camring, you received’t get it by means of the camring holes.
-
Hold the Carabiner Clip from the bungee hooks and simply let the rope dangle down towards the stake.
- Run the knotted finish of the rope by means of the stake. NOTE: The knot (you probably did this in step 4) finally holds the rope in place within the camring notch.
-
Run the rope by means of the notch within the LARGE CamRing Tent Wire Tensioner.
- With a slight quantity of strain, pull down on the carabiner clip to tighten bungee whereas adjusting the LARGE camring (up or down) to take away slack from the twine.
- Repeat steps on the opposite finish of the awning.
- At all times take away your tie down and retract your awning if you end up away out of your rig.
Please see video for additional directions.
Conventional RV Awning Tie Down Kits
The extra conventional strategies of the best way to tie down an awning are available just a few types. Listed below are just a few choices:
Camco Awning De-Flapper Max
The Camco Awning De-Flapper Max works by clipping 8″ extensive grippers to your awning then makes use of velcro-like hook and loop fastener straps mixed with sturdy nylon to connect the devices to the aspect awning arms to stop flapping in gentle windy and wet situations.
Camco Awning De-Flapper Max – Protects Your RV Awning From Expensive Rips and Tears, Rust Resistant
The factor that’s distinctive about this machine is that it doesn’t use any kind of awning stakes within the floor. It solely attaches the awning cloth to the assist arms. These are finest for breezy situations whenever you need peaceable rest on the campsite with primary safety requiring minimal effort to put in. If you’re leaving the realm, you need to take away the grippers and retract your awning to be secure from sudden sudden winds.
Many RVers use this together with some kind of ratchet straps or a wrinkle resistant, heavy obligation pull strap with triangle rings to safe their construction to the bottom. One of the vital widespread and inexpensive decisions is the JR Merchandise 25 Foot RV Awning Tie Down we’re discussing subsequent.
JR Merchandise 25 Foot RV Awning Tie Down
The JR Merchandise 25 Foot RV Awning Tie Down design is likely one of the mostly used ready-made devices to maintain an RV awning from flapping.
JR Merchandise 25 foot Awning Tie Down
The strap runs throughout the highest of your awning after which drops right down to the bottom the place it’s hooked up by stakes and the stress spring supplies the rigidity to the awning. As a result of the strap runs the size of the awning, this package doesn’t match each scenario … it solely matches awnings as much as 25 toes.
Camco Anchor Awning Strap Equipment
The Camco Anchor Awning Strap Equipment is just like our DIY hack design in that you’re anchoring each ends of your awning to the bottom. This awning anchor package makes use of spiral stakes that present further holding energy since you twist them into the bottom.
Camco Awning Anchor Equipment with Pull Pressure Strap
The sturdy strap snugs over the awning and two springs present the stress wanted to scale back the affect of awning flutter due to winds. A ground-anchored machine handles extra intense winds from mom nature versus units that can simply connect the material to the body.
How A lot Wind Can An RV Awning Face up to?
It doesn’t matter what methodology you employ to safe your awning, actually robust winds can exceed the potential of the gadget you might be utilizing to guard it.
How a lot is an excessive amount of if you end up coping with excessive winds? There isn’t any actual reply to this query … use frequent sense relating to retracting your awning so that you don’t find yourself having to exchange it.
This RV house owners discussion board has a very good dialogue about max wind speeds and the best way to preserve RV awning from flapping with out working the chance of damaging the material, {hardware} and even your RV itself.
Your Instruments
Once you plan your RV journeys, pay attention to distinctive traits of the situation the place you can be tenting and produce applicable instruments.
I carry a lot of miscellaneous gadgets in my software field so I’m prepared for any shock I’ll encounter on our tenting journeys.
We created a extremely cool RV Instrument Equipment Guidelines you possibly can obtain totally free so go seize a replica for your self. You possibly can thank me later!
