Sponsored by TTI.
Whether or not for the BMS or motor management, listed here are the important thing specs to grasp when
sourcing these vital EV elements.
Electrical autos proceed to develop in recognition and market share, and electrical present is the gasoline of the longer term. Present sensors are a vital element of immediately’s EVs, serving two main purposes in line with Ajibola Fowowe, international providing supervisor at Honeywell.
“The battery administration system (BMS) makes use of present sensors, along with different sensors such because the voltage and temperature sensors, to observe the state of cost and general well being of the battery pack. The opposite use for present sensors is in motor management, the place it’s relied on to shortly detect and isolate a fault within the electrical drive,” stated Fowowe.
Whatever the use case, there are a number of issues EV engineers should perceive when deciding on among the many many accessible present sensors. Right here’s what that you must know.
Forms of EV present sensors
There are several types of present sensors that every have benefits and downsides for EV purposes.
Closed loop present sensors
Closed loop present sensors have a suggestions system for improved measurement accuracy. A magnetic core concentrates the magnetic discipline generated by the circulate of present and offers a proportional voltage to the quantity of present detected within the core. This allows the sensor to generate a exact present measurement. Due to their excessive accuracy and stability, closed loop sensors are properly suited to use within the BMS.
The Honeywell CSNV 500 (pictured above) is a closed loop present sensor rated for a main present measurement vary of ±500 amps of direct present. The CSNV 500 incorporates a proprietary Honeywell temperature compensation algorithm with digital CAN output, to supply excessive accuracy readings inside ±0.5% error over the temperature vary of -40⁰ to 85⁰ C for strong system efficiency and reliability.
Open loop present sensors
Open loop present sensors function on the precept of magnetic induction. They encompass a main winding, by way of which the present travels, and a secondary winding that measures the induced voltage. Open loop sensors require much less extra electronics and processing in comparison with closed loop sensors, leading to quicker response occasions. Nevertheless, they require extra calibration as a result of they’re extra liable to variations in warmth and magnetic discipline. This implies they’re additionally much less correct — reaching roughly 2% error of the first readings.
The quick response time of open loop present sensors makes them preferrred for motor management features. Motor management purposes don’t require the identical degree of precision because the BMS, so the lack of accuracy in comparison with a closed loop or flux gate sensor isn’t vital.
The Honeywell CSHV line of open loop sensors have a variety of 100 amps to 1,500 amps, and their response occasions are as quick as six microseconds. They’re utilized in fault isolation and fault detection, in addition to controlling motor pace. They may also be utilized in battery administration techniques that don’t require very excessive accuracy, reminiscent of in hybrid electrical autos. These sensors use AEC-Q100 certified built-in circuits to fulfill top quality and reliability necessities.
The Honeywell CSHV collection open loop sensor
Honeywell’s CSNV 1500 has each closed loop and open loop performance. This allows the sensor to fulfill an accuracy requirement of 1%, and is designed for purposes that require excessive accuracy. The CSNV 1500 is used for comparable EV purposes because the CSNV 500, in addition to stationary vitality storage techniques and industrial operations.
Flux gate present sensors
Flux gate present sensors measure adjustments within the magnetic flux of a present because it passes by way of a magnetic loop, from which it will possibly derive present measurements. The Honeywell CSNV 700 is designed for purposes that fall between 500 A and 1,000 A necessities. It has a greater zero-offset and better sensing vary than 500 amps sensors—nevertheless it additionally has larger energy consumption than a closed loop sensor. The CSNV 700 has comparable accuracy ranking because the CSNV 500, at 0.5%, and it additionally makes use of AEC-Q100 certified built-in circuits.
As with closed loop sensors, the flux gate sensor is finest utilized in BMS settings that require excessive accuracy. When utilizing flux gate sensors, nevertheless, engineers have to be aware of their larger energy necessities, which might devour extra battery vitality.
Honeywell’s CSSV 1500 is a mix open loop and flux gate sensor. It was designed to fulfill Automotive Security Integrity Stage C (ASIL-C) necessities for safety-critical purposes the place clients want the next degree of reliability and efficiency. Whereas many 1500 A sensors devour extra energy, the mixture of open loop and flux gate applied sciences makes use of much less energy whereas nonetheless assembly the accuracy and practical security necessities. It meets Automotive Security Integrity Stage C (ASIL C) necessities for security vital purposes. This requirement is typical of battery electrical autos (BEV).
Shunt present sensors
A shunt present sensor measures the voltage drop throughout a way resistor positioned within the conduction path between an influence supply and a load. It’s an inline present sensor related on to the busbar; closed loop, open loop and flux gate sensors are non-contact sensors that don’t have that direct connection.
One of many advantages of a shunt sensor is that it will possibly present an instantaneous measurement of present. Nevertheless, it generates extra warmth and contributes to energy loss within the circuit. This creates parasitic vitality waste. Fowowe says that developments in shunt expertise is growing its attractiveness in excessive voltage techniques and Honeywell is actively researching extra worth that may be derived from the applying of shunt expertise such because the potential mixture of present and voltage measurements into one sensor to scale back the general price of the BMS.
Different key issues for EV present sensors
Along with contemplating which sensor to make use of wherein utility, engineers may also have to think about different variables. Because the sensor must work correctly in a magnetized atmosphere, its capability to deal with magnetic interference is necessary. For BMS purposes that depend on a excessive degree of accuracy, engineers might want to take into account the sensor’s zero-offset, which is the quantity of deviation in output or studying from the bottom finish of the measurement vary.
Ease of integration can also be necessary to contemplate. EVs can use both controller space community (CAN bus) normal or analog outputs. CAN communication is extra frequent within the BMS. CAN bus communication pace is restricted by the CAN protocol to 10 milliseconds, which is suitable for the BMS. For extra fast measurements, motor management features use analog outputs, which may reply in microseconds.
One other issue to be aware of is the EV’s driving atmosphere. EVs want to have the ability to perform correctly in any circumstances, from a warmth wave in Arizona to a snowstorm in New York. Subsequently, the sensor’s working temperature vary must be factored in. Based on Fowowe, Honeywell’s sensors are constructed to keep up efficiency in temperatures starting from -40 to 85 levels Celsius; the sensors function a Honeywell patented multi-point temperature compensation algorithm to make sure the sensors can ship very excessive accuracy and efficiency underneath any driving situation.
To study extra about present sensors for EVs, go to Honeywell at TTI.